Wrong mounted cots run off or affect other things in the spinning- and grinding process.
The following instructions show how to fit the cots correctly.
Mounting of Cots
Reasons for incorrect pressing
Correct use for pressing
Be sure to mount the pressfit straight to the arbor. All parts on the mounting press must be attached cleanly and correctly.
Use the correct plate. The arbour must fit on the plate without wobbling.
Oiling the arbor
If you use older arbors, one drop of machine oil at the arbor before mounting can help to reduce the mounting and dismounting forces.
Check the mounting
Check the correct mounting with dismounting.
Error prevention
Do not place the cot on the arbour and do not hold the cot with your hands while mounting it. The cot may only be hold by the centering pin above.